Decorative Concrete and Masonry Coating Products
Everyday concrete becomes extraordinary with our system of coatings to protect and enhance decorative, architectural and traditional concrete and masonry. Options include clear and pigmented stains and sealers combining superior protective capabilities with unlimited design alternatives.
Departments of Transportation, municipalities, architects, design engineers and concrete contractors all benefit from the choice of texture grade, custom color matching capabilities, and multiple sheen options that fulfill any design or aesthetic requirement.
Our decorative coatings add dimension, appeal and durability to a host of applications, including; stamped and form lined concrete, exposed aggregate, integrally colored concrete, blocks and pavers, and simulated wood, brick, and stone. Additionally, our selection of clear decorative sealers will satisfy any surface requiring a high gloss or matte finish.
Decorative Finishes and Masonry Coatings
TK-ELASTA BLOCK 338-1
Item No.: TK-338-1
A 100% acrylic, elastomeric, above-grade block filler, and primer for all types of concrete and masonry. TK-ELASTA BLOCK 338-1 fills and seals porous surfaces in preparation for top-coating with many kinds of decorative finish coats. Available in white, tan or brown.
Features:
• Fills pores, small voids, and pinholes to provide a smooth, uniform surface.
• Provides an even coating with moisture resistance and maximum protection against wind-driven rain.
• Perfect for top-coating with decorative acrylic or epoxy coatings and latex wall coverings.
• Fast drying.
• Low VOC content and low odor.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
TK-TRI-LASTIC
Item No.: TK-5610 (smooth), TK-5611 (fine), TK-5612 (medium)
An elastomeric, protective coating with high-quality acrylic resins for use on decorative concrete, masonry, and stucco. Available in three texture grades (smooth, fine, medium), TK-TRI-LASTIC provides water repellency, durability, and flexibility throughout a wide range of temperatures and conditions. Available in standard or custom color options.
Features:
• Excellent elongation and recovery properties, allowing it to bridge hairline cracks and move with the substrate.
• Excellent resistance to stains, dirt, air-borne pollutants, acids, alkali, and degradation from freeze/thaw cycles.
• Forms a water-repellent film which is impermeable to wind-driven rain, yet is permeable to water vapor which could otherwise cause moisture damage.
• Contains no plasticizers and will not become hard or brittle through many years of exposure.
• Excellent UV resistance and long-term color retention.
Request Price – Info
TK-TRI-METHOXANE MASONRY COATING 2300
Item No.: TK-2300 (smooth), TK-2300-201 (fine), TK-2300-301 (medium), TK-2300-401 (coarse)
A single-component coating designed to protect “severe duty” surfaces from the abuse of everyday traffic, road maintenance equipment and harsh salt applications – all with the look of a decorative finish. Available in four texture grades (smooth, fine, medium and coarse) and standard or custom colored options.
Features:
• The water repellency of a silane with the look of a decorative texture.
• Single-component – no onsite mixing.
• May be applied to fresh “green” concrete in place of standard curing compounds.
• Superb protection from deicing chemicals.
• Superior adhesion, penetration and long-term color retention.
• Quick dry for shorter lane closures and downtimes.
• Helps stop wind driven rain even on the most of porous of buildings.
• Excellent self-cleaning properties.
Request Price – Info
TK-TRI-SHEEN ACRYLIC 5342
Item No.: TK-5342 series
A 100% acrylic, breathable masonry coating that promotes surface adhesion and color retention for a long-lasting decorative finish. TK-TRI-SHEEN ACRYLIC may be used alone or combined with surfacing texturizing products for increased color uniformity and stability. Available in standard and custom color options.
Features:
• Will not fade, chip, crack, peel or support mildew growth.
• Resistant to degradation caused by ultraviolet light.
• Low maintenance – sheds dirt easily and stays cleaner, longer.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Provides color uniformity and long-lasting color retention.
• Meets Federal Spec. TTP 19 and MN DOT #3584
Downloads: Technical Data | Safety Data | LEED Points | Color Chart
Request Price – Info
TK-TRI-SHEEN ACRYLIC STAIN 5609
Item No.: TK-5609 series
A medium viscosity, opaque, acrylic emulsion designed for wood, wood-like or concrete surfaces. Its acrylic resins and unique formulation create a uniformly colored finish that lasts. Available in standard and custom color options.
Features:
• Provides color uniformity and long-lasting color retention.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Odor free and VOC compliant, making it ideal for interior applications.
• Low maintenance – sheds dirt easily and stays cleaner, longer.
Downloads: Technical Data | Safety Data | LEED Points | Color Chart
Request Price – Info
TK-TRI-SHEEN CONCRETE SURFACER, TEXTURED
Item No.: TK-5319 (fine), TK-5301 (medium), TK-5691 (coarse)
A 100% acrylic, a non-cementitious protective coating that provides a durable and attractive textured finish for a variety of decorative surfaces. Available in three texture grades (fine, medium and coarse) and standard or custom color options.
Features:
• Ready-to-use and requires no primer prior to application.
• One-component formulation eliminates the possibility of on-site mixing/measuring errors, uneven textures or film failures.
• Excellent alternative to multi-component dry plaster mix products.
• Will not fade, chip, crack, peel or support mildew growth.
• Helps control efflorescence and salt leaching.
• Excellent resistance to a road and/or deicing salts.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Provides color uniformity and long-lasting color retention.
• Low maintenance – sheds dirt easily and stays cleaner, longer.
Request Price – Info
TK-TRI-SHEEN CONCRETE SURFACER, SMOOTH
Item No.: TK-5321 series
A 100% acrylic, breathable masonry coating that provides a durable and attractive smooth-textured finish for a variety of decorative surfaces. Available in standard and custom color options
Features:
• Will not fade, chip, crack, peel or support mildew growth.
• Resistant to degradation caused by ultraviolet light.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Long-term color retention.
Request Price – Info
TK-TRI-SHEEN PIGMENTED STAIN 5272
Item No.: TK-5272 series
A low viscosity, semi-opaque, acrylic emulsion designed for cementitious and wood surfaces. Its acrylic resins and unique formulation create a uniformly colored finish that lasts. Available in standard and custom color options.
Features:
• Provides color uniformity and long-lasting color retention.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Odor free and VOC compliant, making it ideal for both interior and exterior applications.
• Acts as a protective shield against substrate damage due to abrasion, weathering and surface degradation.
Request Price – Info
TK-TRI-SHEEN PIGMENTED STAIN PLUS 5275
Item No.: TK-5275 series
A low viscosity, opaque, acrylic emulsion specially designed for wood/concrete composite noise barrier panels. Its acrylic resins and unique formulation create a uniformly colored finish that lasts. Available in standard and custom color options.
Features:
• Acts as a protective shield against substrate damage due to abrasion, weathering and surface degradation.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Protects against water damage without disrupting the sound absorbing qualities of the panel.
• Provides color uniformity and long-lasting color retention to the substrate.
• Odor free and VOC compliant.
Downloads: Technical Data | Safety Data | Color Chart
Request Price – Info
TK-TRI-SHEEN ULTRA STAIN 5750
Item No.: TK-5750 series
A low viscosity, opaque, premium stain designed especially for wood and concrete surfaces. TK-5750 TRI-SHEEN ULTRA STAIN addresses common wood and concrete application problems to provide a durable and long-lasting decorative finish. Available in standard or custom color options.
Features:
• Holds back tannic acid bleed and offers superior grain crack resistance on wood surfaces.
• Reduces efflorescence staining/bloom on concrete surfaces.
• Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.
• Low odor and VOC compliant.
Downloads: Technical Data | Safety Data | Color Chart
Request Price – Info
Products for Architectural Concrete
TK-BRIGHT SEAL
Item No.: TK-BR.SEAL
A blend of 100% methyl methacrylate polymers used as specialized curing, sealing and protective coating for new or existing decorative concrete. TK-BRIGHT SEAL brings out the “wet look” and highlights the natural pigments in the surface, all while protecting it against abrasion and damage.
Features:
• Dries clear and does not yellow with age or with exposure to ultraviolet rays.
• Produces the glossy “wet look” finish sought after for decorative concrete surfaces.
• Highlights the natural pigments in the surface to add sparkle to the finished product.
• Reduces aggregate popouts by percolating in and around the stone to fill gaps and voids.
• Forms a durable and long-lasting film to reduce exposure to water, chemicals, most acids, alkali, oil, grease, fat, food, and beverages.
• Provides protection against freeze/thaw cycles, deicing salts, chemical erosion or efflorescence.
• Compatible with most tile and carpet adhesives and can be used to seal many types of porous tile and resilient floors.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
TK-LIQUID STAMP RELEASE 2090
Item No.: TK-2090
A specialized formulation for preventing stamping and texturizing tools from sticking to fresh stamped concrete and/or concrete overlays, as well as keeping stamping and hand tools free from concrete build up during use.
Features:
• Prevents concrete build-up and stickiness of stamping and texturizing mats, rollers, skins and hand tools.
• Unlike powder releases, curing compounds may be immediately applied without extra washing.
• The pleasant vanilla scent makes it suitable for both indoor or outdoor use.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
Water Based and VOC Content Compliant Products
TK-BRIGHT SEAL WB
Item No.: TK-BR.SEAL WB
An acrylic, waterborne, high solids sealer for new or existing decorative concrete. TK-BRIGHT SEAL WB brings out the “wet look” and highlights the natural pigments in the surface, all while protecting it against abrasion and damage.
Features:
• Dries clear with the glossy “wet look” finish sought after for decorative concrete surfaces.
• Highlights colored and decorative surfaces.
• Ideal for use on interior surfaces where harsh solvent-based systems cannot be tolerated.
• Seals protect and dustproof.
• Compatible with most tile and carpet adhesives and can be used to seal many types of porous tile and resilient floors.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
TK-BRIGHT SEAL VOC
Item No.: TK-BR.SEAL VOC
A blend of 100% methyl methacrylate polymers used as a specialized curing, sealing and protective coating for new or existing decorative concrete. TK-BRIGHT SEAL VOC brings out the “wet look” and highlights the natural pigments in the surface, all while protecting it against abrasion and damage. “VOC” formulation meets VOC content requirements.
Features:
• Dries clear and does not yellow with age or with exposure to ultraviolet rays.
• Produces the glossy “wet look” finish sought after for decorative concrete surfaces.
• Intensifies the color, highlights the natural pigments and adds sparkle to exposed aggregate and colored concrete surfaces.
• Reduces aggregate popouts by percolating in and around the stone to fill gaps and voids.
• Forms a durable and long-lasting film to reduce exposure to water, chemicals, most acids, alkali, oil, grease, fat, food, and beverages.
• Reduces the possibility of aggregate pop-outs by percolating down and around to fill the gaps and voids.
• Facilitates removal of grease, oil and rust stains on driveway and garage floors.
• Provides protection against freeze/thaw cycles, deicing salts, chemical erosion, and efflorescence.
• Compatible with most tile and carpet adhesives and can be used to seal many types of porous tile and resilient floors.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
TK-CONCRETE STAIN WB 3150
Item No.: TK-3150 series
A water-borne, single component, solid colored stain to beautify and protect concrete and masonry surfaces. TK-CONCRETE STAIN WB 3150 acts as a barrier against damaging substances such as acids and oils, all while imparting a long-lasting, attractive painted-look finish. Available in 9 standard colors or custom colors may be produced upon request (allow 2-3 weeks for custom colors to be produced).
Features:
• Results in a painted-look finish that is as rugged as it is beautiful
• Environmentally-friendly formulation with low VOC (volatile organic compound) content.
• Bonds with the surface to provide a barrier against acids, alkali, gas, oil and ultraviolet rays.
• Will not chip, peel, flake or fade.
• Provides color uniformity and long-lasting color retention.
• Offers improved resistance to wear and abrasion over standard finish coatings.
• May be top-coated with a variety of sealers for professionally finished results.
• Single component and fast drying for quick, easy application.
Downloads: Technical Data | Safety Data | Color Chart
Request Price – Info
TK DECORATIVE CONCRETE COATINGS
While concrete retains its deserved reputation for workhorse strength and durability, it has increasingly become an important element in forward-looking architectural design. Function still leads in many cases, but looks count when they signal additional weather- and wear-protection for concrete surfaces. Color choices count when they promote brand identity or highlight facility function. TK Products’ decorative concrete coating lines demonstrate the strong and still-growing demand for innovative, visually appealing treatments for new kinds of concrete surfaces.
Both TK Tri-Sheen and Bright Seal lines balance protective measures for hard-wearing surfaces against new aesthetic demands. Acrylic-based Tri-Sheen offers breathable coatings that resist weathering, road salts and UV-light degradation. Options include low- or medium viscosity, coverage for both cementitious and wood surfaces, and a range of finished textures. Tri-Sheen products share a record of long color retention. Bright Seal methacrylates highlight natural pigments in new or existing concrete, and final results display a high-gloss “wet look.” TK notes the compatibility of Bright Seal products with most carpet and tile adhesives, making the line useful in spaces where floors will eventually be covered. Both water-based and VOC-compliant formulations are available in nine standard colors and additional custom shades. Additional products offer color choices in a long-term water-repellent and a heavy-traffic road-coating. A liquid formulated exclusively to enable easy removal and clean-up for decorative stamping signals the permanence of a new view of concrete as a design material.
