Concrete Patching and Concrete Coating Products
Anchoring and Patching Products
TK-COMPLETE CONCRETE PATCH
Item No.: TK-PTCH
A two-component acrylic/cement and mason sand patching compound. When combined with a liquid bonding agent, it creates a fast-setting, strong and durable patch for a variety of concrete repairs. TK-COMPLETE CONCRETE PATCH out-performs simple water mixed mortars with increased strength, higher adhesion, and more abrasion resistance.
Features:
• Fast-setting in just 30 minutes.
• Stops infiltration of water, grease, oil, salt, and dirt.
• Expands to fill repair area and will not shrink after set.
• No curing compound required.
Downloads: Technical Data | Safety Data
Request Price – Info
Concrete Surfacing and Texturizing Products
TK-TRI-CON SYSTEM
A three-part system combining a cementitious concrete surfacer, an acrylic bonding agent, and a 100% acrylic masonry coating for the ultimate in surface protection, adhesion between components, and an attractively colored/textured finish.
Features:
• Eliminates the rubbing process on vertical concrete
• Fills “bug eyes” left in poured concrete.
• Non-combustible, low toxicity
• Quick drying
• No unpleasant odor
• Low maintenance – cleans easily with soap and water.
Request Price – Info
TK-TRI-MIX CEMENTITIOUS CONCRETE SURFACER
Item No.: TK-TRI-MIX
A dry cementitious concrete surfacer designed to seal, waterproof and color/texturize concrete and masonry substrates. TK-TRI-MIX concrete surfacer is to be used with a liquid bonding agent for improved bonding, adhesion and cohesion between coats, and for added durability against chemical attack.
Features:
• Prevents the infiltration of water or chemicals.
• Fills pores, cracks, and voids to permanently bond the surface making it more dense and durable.
• Provides uniform color and texture to make the surface more attractive.
• Works as an alternative to rubbing architectural concrete surfaces to hide defects and blemishes.
Downloads: Technical Data | Safety Data
Request Price – Info
TK-TRI-MIX PLASTER MIX CEMENTITIOUS CONCRETE SURFACER
Item No.: TK-TRI-P.M
A dry cementitious concrete surfacer designed to seal, waterproof and color/texturize concrete and masonry substrates. TK-TRI-MIX PLASTER MIX concrete surfacer is to be used with a liquid bonding agent for improved bonding, adhesion and cohesion between coats, and for added durability against chemical attack.
Features:
• Prevents against the infiltration of water or chemicals.
• Fills pores, cracks, and voids to permanently bond the surface making it more dense and durable.
• Provides uniform color and texture to make the surface more attractive.
• Works as an alternative to rubbing architectural concrete surfaces to hide defects and blemishes.
Downloads: Technical Data | Safety Data
Request Price – Info
TK CONCRETE PATCHING AND COATING MATERIALS
“Cementitious” is a long string of syllables. That seems ironic when TK’s cementitious (or cement-containing) patching compounds are all about keeping everything–time, expense and effort–short. Mixed with a bonding agent, TK’s patching compounds can forestall the growth of small problems into big ones, extend the life of existing surfaces and recalibrate repair-times in hours, rather than days.
Of particular interest among the patching compounds are the surfacers, mixtures of hydraulic cements, lime, plasticizers, pigments and ground aggregates, which can fill pores, cracks and voids while adding color and texture at the same time. Further weathering, air-quality, UV-light and chemical assaults on surfaces can be forestalled while blending securely-bonded repairs into existing concrete. Short mix- and set-times make small jobs easy to fit into busy schedules without slowing larger repairs or disrupting facility or building use.
