Concrete Densifiers and Concrete Hardener Products
Concrete Floor Hardeners and Densifier Products
TK-FLOOR HARDENER & DENSIFIER 5329
Item No.: TK-5329
A colorless, odorless blend of 100% active sodium silicate and siliconate to strengthen, harden, densify and dustproof new or existing concrete and masonry floors. TK-5329 penetrates into the concrete, sealing the pores and capillaries and creating a chemical reaction within the concrete to produce a hard mineral film that is resistant to water, chemicals, and abrasion.
Features:
• Increases the strength of the surface by filling the pores – decreasing porosity while increasing density.
• Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep.
• Creates a breathable surface for passage of moisture vapor.
• Contains no solvents or fumes, is non-toxic, non-combustible and complies with all VOC regulations.
• Does not leave a film and will not make surfaces slippery.
• Short downtime; floors can be put back into service immediately after application.
• Compatible with floor and carpeting adhesives and most stripping paints.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
TK-SILHARD 1835
Item No.: TK-1835
A sodium silicate curing, hardening and sealing agent for concrete surfaces. By its reaction with the free lime and calcium carbonate in concrete, TK-1835 forms a hard mineral coating that fills the pores of the surface to maximize its density and strength.
Features:
• Increases the strength of the surface by filling the pores – decreasing porosity while increasing density.
• Retains moisture in new concrete, aiding in the curing process and guaranteeing a hard, dust-proof finish.
• Will not impede the penetration or adhesion of subsequent coatings.
• Odorless and contains zero VOCs (volatile organic compounds).
• Dries clear and will not stain or yellow.
• Compatible with most floor and carpeting adhesives.
Downloads: Technical Data | Safety Data | LEED Points
Request Price – Info
Concrete Lithium Silicate Hardener Products
TK-LS HARD LITHIUM SILICATE
Item No.: TK-LS Hard
A premium, penetrating, lithium silicate hardener/densifier that reacts with the free lime in concrete to produce calcium silicate hydrate for the ultimate in surface density and strength.
Features:
• Offers increased strength for floors that are old, deteriorating or weak, or which are subjected to heavy traffic and abrasion.
• Treated surfaces have higher resistance against water, chemicals, and abrasion and require less maintenance and up-keep.
• Will not chip, peel or flake off the surface.
• Odorless and contains zero VOC’s (volatile organic compounds).
Downloads: Technical Data | Safety Data
Request Price – Info
TK-LS HARD N GUARD LITHIUM SILICATE BLEND
Item No.: TK-LS Hard N Guard
A high performance, high-gloss hardener and protective surface treatment for concrete floors and surfaces. TK-LS HARD N GUARD makes use of lithium silicate nanotechnology to increase hardness, density, and durability on new and existing concrete.
Features:
• Treated surfaces have higher resistance to water, chemicals, and abrasion and require less maintenance and up-keep.
• Produces an attractive showroom-quality gloss over the ground and polished concrete floors.
• Easy application; no scrubbing, flushing or waxing required.
• Aids in color retention making it ideal for integral colored concrete and stained floors.
• Short downtime; floor may be used approximately 1 hour after application.
• Low odor and contains zero VOC’s (volatile organic compounds).
Downloads: Technical Data | Safety Data
Request Price – Info
TK hardeners and densifiers build on the solid qualities of polished concrete, making it perform well under conditions of heavy traffic and rapid care. The silicates comprising TK don’t just coat existing concrete floors. Chemical reactions at the molecular level fill and seal pores with compounds formed when hardeners/densifiers and surface concrete interact at the time of application. As porosity decreases, density and strength increase; structural chemically-based changes are permanent. All hardeners are fast-acting; three of four are VOC-free. Floors may accommodate new traffic an hour or so after application. Surfaces will appear and remain cleaner, less vulnerable to abrasions of all kind and compatible with most tile and carpet adhesives. Floors go back to work without disruptions or detours.
Look to TK floor hardeners and densifiers to make old floors longer-lasting and new ones invincible. Strong floors handle more traffic with ease and let maintenance crews go where they are more needed. When everyone needs to get there in a hurry, polished concrete and TK provide an unbeatable smooth trip.
