Skip to:   HYDROMAX Waterproofing & Dampproofing /   Water Based & VOC Content Compliant /  HYDRO SEAL Foundation Crack Repair
HYDROMAX WATERPROOFING & DAMPPROOFING

TK-HYDROMAX 2001 DAMPPROOF COATING

Item No.: TK-2001

A plastic solution formulation for dampproofing above or below-grade poured concrete and concrete block foundation walls to prevent the penetration of water and other chemicals.

Features:
  • Unlike asphalt-based products, TK-HYDROMAX® 2001 penetrates the surface to form a mechanical bond that is stronger than the concrete itself.

  • Will not peel, blister or bubble.

  • Neutral coloring allows for application to either the exterior of the wall or the interior as a decorative coating with additional moisture/vapor retarding benefits.

Downloads:   Technical Data   |     Safety Data     |     LEED Points 
 ________________________________________________________________________________________________________________

TK-HYDROMAX 2002 FOUNDATION WATERPROOF COATING

Item No.: TK-2002

A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof below-grade concrete surfaces. Available in Residential and Commercial formulations.

Features:
  • Bridges cracks up to 1/16" thick to provide a seamless and continual water and chemical barrier.

  • IAPMO (International Association of Plumbing and Mechanical Officials) certified.

Downloads:   Technical Data (residential)  |  Technical Data (commercial)  | Safety Data  |   Warranty (residential) |                           Warranty (commercial)
_________________________________________________________________________________________________________________
WATER BASED & VOC CONTENT COMPLIANT

TK-HYDROMAX 2001 VOC DAMPPROOF COATING

Item No.: TK-2001 VOC

A plastic solution formulation for dampproofing above or below-grade poured concrete and concrete block foundation walls to prevent the penetration of water and other chemicals. "VOC" formulation meets VOC content requirements.

Features:
  • Unlike asphalt-based products, TK-HYDROMAX® 2001 VOC penetrates the surface to form a mechanical bond that is stronger than the concrete itself.

  • Will not peel, blister or bubble.

  • Neutral coloring allows for application to either the exterior of the wall or the interior as a decorative coating with additional moisture/vapor retarding benefits.

Downloads:   Technical Data   |     Safety Data
_________________________________________________________________________________________________________________   

TK-HYDROMAX 2002 VOC FOUNDATION WATERPROOF COATING

Item No.: TK-2002 VOC

A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof below-grade concrete surfaces.  Available in Residential and Commercial formulations.  "VOC" formulation meets VOC content requirements.

Features:
  • Bridges cracks up to 1/16" thick to provide a seamless and continual water and chemical barrier.

  • IAPMO (International Association of Plumbing and Mechanical Officials) certified.

Downloads:   Technical Data (residential)  |  Technical Data (commercial)  |    Safety Data
_________________________________________________________________________________________________________________  

TK-HYDROMAX 2003 RUBBERIZED WATER BASE FOUNDATION COATING

Item No.: TK-2003

A single-component, non-breathable, liquid applied foundation coating for waterproofing below-grade concrete. This water based, rubberized coating provides a continuous protective barrier against the penetration of water and chemicals.  Available in Residential and Commercial formulations. 

Features:
  • Bridges cracks up to 1/16" thick to provide a seamless and continual water and chemical barrier.

  • Neutral coloring allows for application to either the exterior of the wall or the interior as a decorative coating with additional moisture/vapor retarding benefits.

Downloads:   Technical Data (residential)  |  Technical Data (commercial)  |   Safety Data   |   LEED Points
_________________________________________________________________________________________________________________  
HYDRO SEAL FOUNDATION CRACK REPAIR

TK-HYDRO SEAL FOUNDATION CRACK REPAIR KIT

A flexible, hydrophobic, polyurethane, two-component cartridge system used to repair cracks, joints, and to prevent water leakage in concrete foundation walls. The HYDRO SEAL® kit includes everything needed to quickly and easily repair 8-10 linear feet of cracks.

Features:
  • Permanently stops leaks.

  • Travels into the crack and through the foundation for a complete seal.

  • Works on even the smallest of cracks.

  • Easy to use and convenient cartridge packaging requires no mixing or guesswork.

  • Complete repair in just 1 hour.

  • Suitable for repairs in confined spaces where larger pump injection is not practical.

Downloads:   Technical Data   |     Safety Data