Skip to:  Solvent Based Water Repellent  |  Water Based & VOC Compliant Water Repellent  |  Specialty Water Repellents

FEATURED PRODUCT

TK-SALT PROTECTOR PLUS™ WB

Item No.: TK-290 WB 05

A ready-to-use, water-borne, VOC compliant, deep penetrating silane/siloxane blend that acts as an impenetrable barrier against the intrusion of water and chloride ions (salt) into concrete and masonry surfaces.

Features:
Downloads:   Technical Data   |     Safety Data  |    Sell Sheet
___________________________________________________________________________________________________________________
SOLVENT BASED WATER REPELLENT

TK-TRI-SILOXANE 290

Item No.: TK-290

A low viscosity, breathable, deep penetrating water repellent for concrete and masonry. Through the process of hydrolysis, TK-TRI-SILOXANE 290 chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |  Safety Data 
 _________________________________________________________________________________________________________________

TK-TRI-SILOXANE 290 BDS (BRIDGE DECK SEALER)

Item No.: TK-290 BDS

A low viscosity, breathable, deep penetrating water repellent for concrete bridge decks and parking structures. Through the process of hydrolysis, TK-TRI-SILOXANE 290 BDS chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |  Safety Data   
 _________________________________________________________________________________________________________________

TK-TRI-SILOXANE 290 FINAL SEAL

Item No.: TK-290 FIN. SEAL

A low viscosity, breathable, deep penetrating water repellent for concrete and masonry. Due to its unique formulation, TK-TRI-SILOXANE 290 FINAL SEAL may be applied as a final sealer to concrete that was previously coated with a cure and seal compound. FINAL SEAL re-solvates the cure and seal resin, penetrating into the surface and sealing it off from water and harmful deicers.

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |   Safety Data   
 _________________________________________________________________________________________________________________

TK-TRI-SILANE 590-40

Item No.: TK-590-40

A 40% active, one-component, deep penetrating silane water repellent for concrete and masonry. Through the process of hydrolysis, TK-TRI-SILANE 590-40 chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |    Safety Data   
 _________________________________________________________________________________________________________________

TK-TRI-SILANE 590-1 MS (MINERAL SPIRITS)

Item No.: TK-590-1 MS

A one component, deep penetrating water repellent consisting of silane in mineral spirits for protecting concrete and masonry. Through the process of hydrolysis, TK-TRI-SILANE 590-1 MS chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |    Safety Data   
_________________________________________________________________________________________________________________

TK-Tri-Silane 590-90

Item No.: TK-590-90

A one-component, high performance, deep penetrating silane water repellent for concrete and masonry. TK-590-90 chemically bonds with the surface and seals it off against damage due to water infiltration, waterborne salts, chloride ions and acids.

Features:
  • Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded, to provide ultimate protection against damage due to water and chloride ion intrusion.

  • Protects the surface from damage caused by water intrusion, acid rain, deicing chemicals, freeze/thaw cycles, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.

  • Formulation is ready-to-use, colorless, non-darkening, non-staining and non-yellowing.

Downloads:   Technical Data   |    Safety Data   
_________________________________________________________________________________________________________________

TK-590-100

Item No.: TK-590-100

A one-component, 100% active, high performance, deep penetrating silane water repellent for concrete and masonry. TK-590-100 chemically bonds with the surface and seals it off against damage due to water infiltration, waterborne salts, chloride ions and acids.

Features:
  • Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded, to provide ultimate protection against damage due to water and chloride ion intrusion.

  • Protects the surface from damage caused by water intrusion, acid rain, deicing chemicals, freeze/thaw cycles, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.

  • Formulation is ready-to-use, colorless, non-darkening, non-staining and non-yellowing.

Downloads:   Technical Data   |    Safety Data   
_________________________________________________________________________________________________________________
WATER BASED AND VOC CONTENT COMPLIANT

TK-TRI-SILOXANE 290 VOC

Item No.: TK-290 VOC

A low viscosity, breathable, deep penetrating water repellent for concrete and masonry. Through the process of hydrolysis, TK-TRI-SILOXANE 290 VOC chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents. "VOC" formulation meets VOC content requirements. 

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |     Safety Data 
_________________________________________________________________________________________________________________

TK-TRI-SILOXANE 290 WB

Item No.: TK-290 WB

A water-borne silane/siloxane concrete and masonry water repellent to prevent water damage by eliminating moisture present on the surface.   TK-290 WB penetrates up to 1/4" and chemically bonds with the substrate to become a permanent part of the concrete, prohibiting water and chloride ion intrusion that could cause surface deterioration.

Features:
  • Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded, to provide ultimate protection against damage due to water and chloride ion intrusion.

  • Protects the surface from damage caused by acid rain, deicing chemicals, freeze/thaw cycles, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.

  • Formulation is ready-to-use, colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |     Safety Data 
_________________________________________________________________________________________________________________

TK-290 BDS OTC (BRIDGE DECK SEALER)

Item No.: TK-290 BDS OTC

A low viscosity, breathable, deep penetrating water repellent for concrete bridge decks and parking structures. Through the process of hydrolysis, TK-TRI-SILOXANE 290 BDS OTC chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents. "OTC" formulation meets VOC content requirments.

Features:
  • Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.

  • Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.

  • Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |    Safety Data   
_________________________________________________________________________________________________________________

TK-Tri-Silane 590-40 VOC

Item No.: TK-590-40 VOC

A 40% active, single-component, invisible waterproofing treatment for concrete and masonry.  TK-TRI-SILANE 590-40 VOC chemically bonds with the surface and seals it off against damage due to water infiltration, waterborne salts, chloride ions and acids.  "VOC" formulation meets VOC content requirements.

Features:
  • Excellent penetration and chemical reactivity provides long-lasting protection that extends the life of the surface.

  • High alkali resistance and resistance against traffic abrasion.

  • Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.

  • Formulation is ready-to-use, colorless, non-darkening, non-staining and non-yellowing.

Downloads:   Technical Data   |    Safety Data
_________________________________________________________________________________________________________________
SPECIALTY WATER REPELLENTS

TK-SALT PROTECTOR PLUS™ WB

Item No.: TK-290 WB 05

A ready-to-use, water-borne, VOC compliant, deep penetrating silane/siloxane blend that acts as an impenetrable barrier against the intrusion of water and chloride ions (salt) into concrete and masonry surfaces.

Features:
  • Extremely low VOC and virtually odor-free.

  • Low viscosity for deep penetration into the substrate and the elimination of surface moisture which may lead to spalling, freeze damage and rebar corrosion.

  • Forms a permanent bond with the substrate to provide uniform protection against damage due to water and deicing chemicals, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most atmospheric chemicals.

  • Out performs standard water repellents which can only bond physically with the surface and provide marginal protection.

  • The coating is colorless, non-staining and non-yellowing.

Downloads:   Technical Data   |     Safety Data  |    Sell Sheet
__________________________________________________________________________________________________________________

TK-SILOXANE DYE 5765

Item No.: TK-5765 series

A specially formulated pigmented waterproofing treatment for producing uniformly colored concrete surfaces that are water and chemically resistant. Available in standard or custom color options.

Features:
  • Disguises and blends discolored or unevenly colored surfaces to produce a uniform and attractive finish.

  • Protects the surface against damaging effects of water intrusion, acid rain, deicing chemicals, freeze/thaw exposure, airborne dirt, smog, industrial fumes, and most other atmospheric chemicals.

Downloads:   Technical Data   |     Safety Data   
_________________________________________________________________________________________________________________

TK-WATER & OIL REPELLENT 592

Item No.: TK-592

A single component, ultra low viscosity, deep penetrating water and oil repellent for concrete.  It offers invisible protection against staining and structural damage caused by contact with water, waterborne salts, deicing chemicals and oil.

Features:
  • Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded.

  • Allows the substrate to breathe and prevents structure damage from trapped water and waterborne salts.

  • Ultra low viscosity for maximum surface penetration.

  • No need for additional sealers (membrane forming) to prevent staining.

Downloads:   Technical Data   |    Safety Data