Skip to:  Floor Hardeners & Densifiers /  Lithium Silicate Hardeners
FLOOR HARDENERS & DENSIFIERS

TK-FLOOR HARDENER & DENSIFIER 5329

Item No.: TK-5329

A colorless, odorless blend of 100% active sodium silicate and siliconate to strengthen, harden, densify and dustproof new or existing concrete and masonry floors.  TK-5329 penetrates into the concrete, sealing the pores and capillaries and creating a chemical reaction within the concrete to produce a hard mineral film that is resistant to water, chemicals and abrasion.

Features:
  • Increases the strength of the surface by filling the pores - decreasing porosity while increasing density.

  • Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep.

  • Creates a breathable surface for passage of moisture vapor.

  • Contains no solvents or fumes, is non-toxic, non-combustible and complies with all VOC regulations.

  • Does not leave a film and will not make surfaces slippery.

  • Short downtime; floors can be put back into service immediately after application.

  • Compatible with floor and carpeting adhesives and most stripping paints.

Downloads:   Technical Data   |     Safety Data    |   LEED Points
 ________________________________________________________________________________________________________________

TK-SILHARD 1835

Item No.: TK-1835

A sodium silicate curing, hardening and sealing agent for concrete surfaces. By its reaction with the free lime and calcium carbonate in concrete, TK-1835 forms a hard mineral coating that fills the pores of the surface to maximize its density and strength. 

Features:
  • Increases the strength of the surface by filling the pores - decreasing porosity while increasing density.

  • Retains moisture in new concrete, aiding in the curing process and guaranteeing a hard, dustproof finish.

  • Will not impede the penetration or adhesion of subsequent coatings.

  • Odorless and contains zero VOC’s (volatile organic compounds).

  • Dries clear and will not stain or yellow.

  • Compatible with most floor and carpeting adhesives.

Downloads:   Technical Data   |    Safety Data   |   LEED Points
________________________________________________________________________________________________________________
LITHIUM SILICATE HARDENERS

TK-LS HARD LITHIUM SILICATE

Item No.: TK-LS Hard

A premium, penetrating, lithium silicate hardener/densifier that reacts with the free lime in concrete to produce calcium silicate hydrate for the ultimate in surface density and strength.

Features:
  • Offers increased strength for floors that are old, deteriorating or weak, or which are subjected to heavy traffic and abrasion.

  • Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep.

  • Will not chip, peel or flake off the surface.

  • Odorless and contains zero VOC's (volatile organic compounds).

Downloads:   Technical Data   |   Safety Data   
 _______________________________________________________________________________________________________________

TK-LS HARD N GUARD LITHIUM SILICATE BLEND

Item No.: TK-LS Hard N Guard

A high performance, high-gloss hardener and protective surface treatment for concrete floors and surfaces. TK-LS HARD N GUARD makes use of lithium silicate nanotechnology to increase hardness, density and durability on new and existing concrete.

Features:
  • Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep.

  • Produces an attractive showroom-quality gloss over ground and polished concrete floors.

  • Easy application; no scrubbing, flushing or waxing required.

  • Aids in color retention making it ideal for integral colored concrete and stained floors.

  • Short downtime; floor may be used approximately 1 hour after application.

  • Low odor and contains zero VOC's (volatile organic compounds).

Downloads:   Technical Data   |   Safety Data