Skip to: Bridge Deck Coatings  |  TK-EPO Civil Engineering Epoxies  /  Epoxy Patching & Repair Materials
BRIDGE DECK COATINGS

TK-EPOXY BRIDGE DECK OVERLAY 2109

Item No.: TK-2109

A low viscosity. 100% solids, solvent-free, two-component epoxy system. Formulated to seal, protect and lengthen the life of concrete bridge decks and parking structures, TK-EPOXY BRIDGE DECK OVERLAY 2109 also provides exceptional skid resistance with a top-layer of specially selected aggregate.

Features:
  • Excellent bond strength for a durable, yet flexible coating that is insensitive to moisture.

  • Superior resiliency and impact resistance.

  • Bonds directly with the surface for exceptional chemical resistance and waterproofing.

  • Non-shrink and flexible enough to withstand slight movement and extreme temperature changes.

  • Provides skid resistance with a 3/8" top-layer of specially selected sharp black aggregate.

  • Economical and long lasting.

  • Easy to use 1:1 mixing ratio.

Downloads:   Technical Data   |   Safety Data    |    LEED Points     |   Application
 _________________________________________________________________________________________________________________

TK-BRIDGE DECK & CRACK SEALER 2110

Item No.: TK-2110

A VOC compliant, low viscosity, solvent-free, two-component, gravity-fed crack and deck sealer designed specifically for Department of Transportation (D.O.T.) projects.  May be used as a safer alternative to hazardous methylmethacrylates.

Features:
  • Ultra low viscosity for penetrating hairline cracks up to 0.1 mm in width (.004 inches).

  • Fast turn-around times and shorter traffic delays; surfaces may be reopened to traffic in just 4 hours (at 72°F)

  • Protects the surface from chloride chemical attack as well as abrasion, acids, alkali, petroleum and salt spray.

  • When topcoated with silica sand, provides skid resistance for safer surfaces.

Downloads:   Technical Data   |    Safety Data    |    LEED Points  
 _________________________________________________________________________________________________________________

TK-MMA BRIDGE DECK & CRACK SEALER 2414

Item No.: TK-2414

A two-component, low viscosity, low surface tension, solvent-free, rapid curing reactive methacrylate resin for penetrating, repairing and sealing cracks in concrete bridge decks and parking structures.

Features:
  • Uses gravity and low viscosity to penetrate cracks.

  • Provides resistance from water and chloride ion penetration

  • Resists effects of UV rays, weathering and aging and prevents premature deterioration of the surface.

  • Usable in a wide range of temperatures (from 35°F to 104°F), allowing for an extended application season

  • Fast curing - permits surface reopening in minimal time

  • Low VOC content

  • User friendly and easy to use

Downloads:   Technical Data   |    Safety Data 
 _________________________________________________________________________________________________________________

TK-HMWMA BRIDGE DECK & CRACK SEALER 2415

Item No.: TK-2415

A fast curing, 100% solids, completely reactive polymer system designed to deeply and rapidly penetrate into cracks and pores in concrete surfaces.  It re-bonds cracks and acts as a tenacious barrier to protect high traffic surfaces from water and environmental contamination.

Features:
  • Provides resistance from water and chloride ion penetration

  • Resists effects of weathering and aging

  • Usable in a wide range of substrate temperatures (from 50°F to 90°F), allowing for an extended application season

  • Fast curing - permits surface reopening in minimal time (in daytime, sunlight conditions)

  • Low viscosity and surface tension result in excellent penetration into cracks

  • Low odor, low VOC’s

  • User friendly and easy to use

  • High flash point

Downloads:   Technical Data   |    Safety Data 

 

TK-EPO CIVIL ENGINEERING EPOXIES

TK-EPO 15K EPOXY GROUT

Item No.: TK-EPO 15K

A three-component, 100% solids, high performance, epoxy machine grout for providing precise alignment, high impact resistance and oil and chemical resistance to dynamic load equipment foundation applications. Also available in deep pour and pumpable formulations.

Features:
  • Ideal for providing precise placement beneath dynamic loads

  • Even aggregate distribution

  • High early strength and impact resistance

  • Excellent flowability

  • Negligible shrinkage and creep

  • Pre-measured kits for ease of use

Downloads:   Technical Data   |     Safety Data    
__________________________________________________________________________________________________________________

TK-EPO 2000 BONDING AGENT

Item No.: TK-EPO 2000

A two-component, 100% solids, medium viscosity, multi-purpose epoxy for high strength bonding between new and existing materials and providing crack injection repairs to a variety of surfaces.

Features:
  • High strength structural adhesive

  • Moisture insensitive - may be used on either damp or dry surfaces

  • May be used as a binder in epoxy mortar

  • Convenient 1:1 mix ratio (by volume)

Downloads:   Technical Data   |     Safety Data 
_________________________________________________________________________________________________________________

TK-EPO MP PATCH

Item No.: TK-EPO MP

A three-component, 100% solids, non-shrink, multi-purpose epoxy patching mortar that forms a tenacious bond with the substrate to provide a superior concrete patch in a variety of applications.

Features:
  • Forms a tenacious and mechanical bond for superior patching.

  • Low modulus.

  • Rapid strength gain allows surface to be reopened to traffic in 3-4 hours at 73°F (23°C).

  • Freeze/thaw resistance.

  • Semi-rigid for shock absorption.

  • Compatible with epoxy overlays.

  • Textured wearing surface.

  • Eliminates Halo effect.

Downloads:   Technical Data   |     Safety Data    
_________________________________________________________________________________________________________________

TK-EPO EXCEL PATCH

Item No.: TK-EPO EXCEL

A rapid setting, 100% solids, high strength epoxy/urethane hybrid used to repair and patch concrete in a variety of applications.

Features:
  • Complete patching and repair system (including aggregate) for spalled and deteriorating surfaces

  • Working temperature of -20°F to 85°F.

  • Rapid setting - open to traffic in 12-15 minutes.

  • Convenient 1:1 mix ratio (by volume).

  • Pre-measured kit for ease of use on the jobsite.

Downloads:   Technical Data   |     Safety Data   
_________________________________________________________________________________________________________________
EPOXY PATCHING & REPAIR MATERIALS

TK-EPOXY PATCH 211

Item No.: TK-211

A versatile two-component, solvent-free epoxy resin system for patching, repairing and bonding concrete and other substrates.  Insensitive to moisture, TK-EPOXY PATCH 211 may be used for a variety of purposes in either dry or damp environments. 

Features:
  • May be mixed with sand or coarse aggregate to produce an economical patching compound.

  • Excellent chemical resistance - particularly to deicing salts, petroleum products, and certain acids.

  • Provides a skid-proof surface when mixed with sand or aggregate.

  • USDA approved for use in meat/poultry processing facilities.

Downloads:   Technical Data   |    Safety Data    |   LEED Points
_________________________________________________________________________________________________________________

TK-PASTE EPOXY PATCH 411

Item No.: TK-411

A versatile, two-component, 100% solids solvent-free epoxy resin paste system for vertical or overhead patching and bonding on new or existing concrete.   TK-PASTE EPOXY PATCH 411 produces an economical patching compound that is trowelable, sag resistant and capable of producing up to 1" lifts.

Features:
  • May be mixed with sand or coarse aggregate to produce an economical patching compound.

  • Excellent chemical resistance - particularly to deicing salts, petroleum products, and certain acids.

  • Provides a skid-proof surface when mixed with sand or aggregate.

  • USDA approved for use in meat/poultry processing facilities.

Downloads:   Technical Data   |    Safety Data    |   LEED Points
_________________________________________________________________________________________________________________

TK-EPOXY CRACK FILLER 9000

Item No.: TK-9000

A two-component, 100% solids epoxy designed with state of the art epoxy resins and low-toxicity curing agents for filling and sealing cracks in concrete decking and floors.  TK-9000 EPOXY CRACK FILLER provides long-term protection against harmful chemicals and deicers.

Features:
  • Due to its low viscosity, easily flows and seeps into small cracks to effectively seal them off from damage and degradation.

  • Highly resistant to most acids, alkali, salts and other chemicals.

  • Becomes a permanent part of the concrete and provides tenacious holding power for long-term protection.

Downloads:   Technical Data   |   Safety Data    |   LEED Points
__________________________________________________________________________________________________________________

TK-EPOXY CRACK & JOINT FILLER 9010

Item No.: TK-9010

A fast setting, semi-rigid, two-component epoxy system for filling control and construction joints in concrete flooring. 

Features:
  • Epoxy formulation allows it to be used in damp areas where comparable urethane/polyurea joint fillers cannot be used.

  • Gels in less than 10 minutes and is tack free in under an hour.

  • Extremely low VOC content (< 1 g/l ).

Downloads:   Technical Data   |   Safety Data    |   LEED Points
_________________________________________________________________________________________________________________

TK-POLYUREA JOINT FILLER 9020

Item No.: TK-9020

A fast-setting, two-component, polyurea/urethane blend used to fill control joints in concrete flooring. 

Features:
  • Flexible enough to limit parallel crack occurrence, yet tensile enough to hold up to heavy traffic from wheels, forklifts and heavy traffic.

  • Fast cure time gels in less than 5 minutes and tack free in 30 minutes) allows the area to be reopened to traffic in minimal time.

Downloads:   Technical Data   |   Safety Data    | LEED Points
_________________________________________________________________________________________________________________

TK-POLYUREA CRACK REPAIR 9030

Item No.: TK-9030

A fast-setting, low viscosity, polyurea/urethane blend for penetrating and filling cracks in concrete bridge decks and slabs.

Features:
  • Due to its low viscosity, easily penetrates into cracks as small as 1/32" to effectively seal them off from damage and degradation.

  • Extremely fast setting - gels in 3-6 minutes and tack free in 10 minutes.

Downloads:   Technical Data   |    Safety Data    |   LEED Points