Skip to:   Airmax Air & Vapor Barriers  |  Fluid Applied Weather Resistant System /  Transitional Tapes & Caulks
AIRMAX AIR & VAPOR BARRIERS

TK-AIRMAX 2101 NON-PERMEABLE SINGLE WYTHE AIR BARRIER

Item No.: TK-2101

A single-component, cold applied, thermoplastic air/vapor barrier that serves as an impermeable barrier coat for the interior of single wythe and other wall surfaces.

Features:
  • Provides a continuous and permanent air/vapor barrier that prevents the penetration of air and moisture into interior walls and wall cavities.

  • Minimizes air movement through exterior walls resulting in energy savings.

  • Unlimited UV resistance.

  • Non-breathable and non-elastomeric.

Downloads:    Technical Data  |  Safety  |  Warranty
 _________________________________________________________________________________________________________________

TK-AIRMAX 2102 NON-PERMEABLE AIR BARRIER

Item No.: TK-2102

A high performance, liquid applied air/vapor barrier for commercial cavity walls. It prohibits movement of air through the building envelope, resulting in energy savings, while also restricting moisture condensation which could lead to structural damage, mold or mildew.

Features:
  • Coating dries quickly.

  • Provides a continuous air/vapor and water barrier and a continuous water drainage plane flashed to discharge to the exterior of the structure.

  • Elastomeric, long-lasting, and suitable for a wide variety of surfaces.

  • Minimizes air movement through exterior walls resulting in energy savings.

  • Chemically resistant to algae, bacteria, alkalis, acids and degradation from freeze/thaw cycles or ultraviolet rays.

  • Provides UV resistance for 12 months.

Downloads:    Technical Data  |  Safety  |  LEED Points  |  Warranty  |  Architectural Spec
 _________________________________________________________________________________________________________________

TK-AIRMAX 2102 VOC NON-PERMEABLE AIR BARRIER

Item No.: TK-2102 VOC

A high performance, liquid applied air/vapor barrier for commercial cavity walls. It prohibits movement of air through the building envelope, resulting in energy savings, while also restricting moisture condensation which could lead to structural damage, mold or mildew.  "VOC" formulation meets VOC content requirements. 

Features:
  • Coating dries quickly.

  • Provides a continuous air/vapor and water barrier and a continuous water drainage plane flashed to discharge to the exterior of the structure.

  • Elastomeric, long-lasting, and suitable for a wide variety of surfaces.

  • Minimizes air movement through exterior walls resulting in energy savings.

  • Chemically resistant to algae, bacteria, alkalis, acids and degradation from freeze/thaw cycles or ultraviolet rays.

  • Provides UV resistance for 12 months.

Downloads:    Technical Data  |  Safety  |  LEED Points  |  Warranty  |  Architectural Spec
 _________________________________________________________________________________________________________________

TK-AIRMAX 2103 WATER BASED NON-PERMEABLE AIR BARRIER

Item No.: TK-2103

A high performance water based, rubberized air/vapor barrier for both commercial and residential cavity walls. It prohibits movement of air through the building envelope, resulting in energy savings, while also restricting moisture condensation which could lead to structural damage, mold or mildew.

Features:
  • Coating dries quickly.

  • Provides a continuous air/vapor and water barrier and a continuous water drainage plane flashed to discharge to the exterior of the structure.

  • Elastomeric, long-lasting, and suitable for a wide variety of surfaces.

  • Minimizes air movement through exterior walls resulting in energy savings.

  • Chemically resistant to algae, bacteria, alkalis, acids and degradation from freeze/thaw cycles or ultraviolet rays.

  • Provides UV resistance for 12 months.

Downloads:    Technical Data  |  Safety  |  LEED Points  |  Warranty  |  Architectural Spec
 _________________________________________________________________________________________________________________

TK-AIRMAX 2104 VAPOR PERMEABLE AIR BARRIER

Item No.: TK-2104

A high performance, water-borne liquid applied air barrier for use on both residential and commercial cavity walls. TK-AIRMAX 2104 VAPOR PERMEABLE creates a seamless, tough film to act as a solid barrier against air leakage (infiltration/exfiltration), resulting in energy savings while also restricting moisture condensation which could lead to structural damage, mold or mildew.

Features:
  • Reduces air flow through exterior walls, resulting in energy savings.

  • Creates a tough, seamless, elastomeric film with superior water repellency.

  • Bridges cracks and moves with the substrate throughout a wide range of temperatures.

  • Maintains flexibility throughout multiple weathering cycles - contains no plasticizers and will not become hard or brittle through many years of exposure.

  • Forms a film which is repellent to wind driven rain, yet is permeable to water vapor to allow unwanted moisture to escape the occupied area and substrate.

  • Excellent resistance to dirt, acid, alkali, airborne pollutants, mildew and degradation from freeze/thaw cycles and ultraviolet rays.

  • Provides UV resistance for 12 months.

Downloads:    Technical Data  |  Safety  |  LEED Points  |  Warranty  |  Architectural Spec
_________________________________________________________________________________________________________________

TK-AIRMAX 2105 VAPOR PERMEABLE SOLVENT BASE AIR BARRIER

Item No.: TK-2105

A vapor permeable, high performance, solvent-borne liquid membrane air/weather barrier for use on both commercial and residential concrete, masonry, exterior gypsum and OSB board, TK-AIRMAX 2105 VAPOR PERMEABLE SOLVENT BASE creates a seamless, tough film to act as a solid barrier against air infiltration and exfiltration, minimizing energy losses and condensation issues in the process.

Features:
  • Reduces air flow through exterior walls, resulting in energy savings.

  • Creates a tough, seamless, elastomeric film with superior water repellency.

  • Bridges cracks and moves with the substrate throughout a wide range of temperatures.

  • Maintains flexibility throughout multiple weathering cycles - contains no plasticizers and will not become hard or brittle through many years of exposure.

  • Forms a film which is repellent to wind driven rain, yet is permeable to water vapor to allow unwanted moisture to escape the occupied area and substrate.

  • Excellent resistance to dirt, acid, alkali, airborne pollutants, mildew and degradation from freeze/thaw cycles and ultraviolet rays.

  • Provides UV resistance for 12 months.

Downloads:    Technical Data  |  Safety  |  LEED Points  |  Warranty
_________________________________________________________________________________________________________________
FLUID APPLIED WEATHER RESISTANT SYSTEM

TK-CLIMATE TECH WEATHER RESISTANT SYSTEM

Item No.: TK-2206

A liquid membrane applied system providing complete protection against weather and climatic effects to gypsum sheathing, plywood and OSB board.  Because it does not rely on plastics or fabrics which can tear, puncture or rip (thus resulting in costly exposure of the sheathing and wall cavities to the elements), the CLIMATE TECH™ system far out-weighs traditional housewraps in both value and performance.

Features:
  • Forms a tough, seamless, and uninterrupted film that is resistant to water, mildew, dirt, chemicals and ultraviolet rays.

  • Permanently adheres to the surface for protection that will not shift or blow off in high wind conditions.

  • Offers superior flexibility, elongation and recovery properties which allow it to bridge cracks and move with the substrate throughout a wide range of temperatures.

  • Restricts air flow through exterior walls for increased energy efficiency.

  • Permeable to water vapor to prevent moisture build-up in interior wall cavities.

  • Full line of complimentary accessory products for the CLIMATE TECH™system. 

Downloads:    Technical Data  |  Safety  |  LEED Points  | Sell Sheet
__________________________________________________________________________________________________________________
TRANSITIONAL TAPES & CAULKS

TK-CLIMATE FLASH ALL WEATHER FLASHING TAPE

Item No.: TK-2200

A low permeability, self-adhering air, moisture and vapor barrier that bonds to a wide variety of construction materials and stays put through a wide range of temperatures.

Features:
  • Self-adhering air, moisture and vapor barrier.

  • Self-seals around nails and staples.

  • Durable and resistant to tears and puncturing.

  • Low permeability.

  • Conforms to irregular surfaces.

  • Broad application temperature range from 5°F (-15°C) to 120°F (48°C).

  • Cuts and applies easily with no special tools required for application.

Downloads:    Technical Data  |  Safety 
_________________________________________________________________________________________________________________

TK-SUPER SEAL PE POLYETHER JOINT SEALANT

Item No.: TK-2204

A moisture curing, elastomeric, polyether joint sealant for filling and sealing joints and seams in construction materials.  SUPER SEAL PE is ideal for application in damp, dry or cold climatesand may be used effectively in difficult construction site conditions such as wet or dry climates, and at low temperatures.

Features:
  • Solvent-free and contains no isocyanates.

  • Will not shrink upon curing and will not discolor with exposure to UV light.

  • Unlike many urethane sealants, does not "outgas" or bubble when applied to damp surfaces.

  • Provides excellent adhesion with most construction materials.

  • Resilent elastomeric properties make it flexible enough for joint movement in excess of 35% compression and extension.

Downloads:    Technical Data  |  Safety 
_________________________________________________________________________________________________________________

TK-SS FLASHING STAINLESS STEEL FLASHING

Item No.: TK-2201

A self-adhering, stainless steel lap/splice material to be used with TK's TWF-18 THRU WALL FLASHING. SS FLASHING forms a tough, watertight bond with the substrate and prevents air transmission through masonry, curtain walls, construction joints and fittings.

Features:
  • Offers outstanding resistance to punctures, tears, fire, mold and UV light.

  • May be applied in temperatures from 20°F to 170°F.

  • Remains stable and air tight at temperatures from -70°F to 200°F.

  • Makes an excellent transitional flashing as it is compatible with the AIRMAX line of air and vapor barriers, as well as most construction sealants, insulations, roofing membranes and below grade-waterproofing.

Downloads:    Technical Data  |  Safety

__________________________________________________________________________________________________

TK-TWF-18 STAINLESS STEEL THRU-WALL FLASHING

Item No.: TK-2202

A tough and durable stainless steel flashing to collect water in wall cavities and redirect it to the exterior of the building; thus preventing costly water damage and deterioration of the building envelope.

Features:
  • Out-performs competitive flashing products with superior durability against punctures, tears, and degradation.

  • Offers universal compatibility with wall components, construction adhesives and sealants and will not discolor masonry or adjacent surfaces.

  • Not susceptible to UV ray degradation.

  • Resistance to corrosion, mold and fire.

Downloads:    Technical Data  |  Safety